Discover discount prices on many lovely fragances. Lots of top perfume names to choose from, Clavin Klevin, Christian Dior, Chanel, Estée Lauder, find exactly what you like and save.

Curve Crush

The lowsider or lowside is a type of motorcycle accident usually occurring in a curve and caused by a locked wheel due to excessive braking. more...

Home

Armani

Avon

Bijan

Bvlgari

Cartier

Cerruti

Chanel

Chantilly

Charlie

Chloe

Chopard

Christian Dior

Clarins

Clinique

Comptoir Sud Pacifique

Coty

Creed

Davidoff

Demeter

Diesel

DKNY

Escada

FCUK

Fendi

Gap

Giorgio of Beverly Hills

Givenchy

Gucci

Guerlain

Guess

Halston

Hermes

J Lo

Kenzo

Lacoste

Lalique

Lanvin

Curve

Mambo

Other

Realities

Soul by Curve

Spark

Vivid

Lucky

Prada

Revlon

Rochas

Sarah Jessica Parker Lovely

Tiffany

Makeup

Behaviour leading to a lowsider and physical explanation

All forces occurring between the motorcycle and the road (such as accelerating, decelerating and steering) are transmitted by friction occurring in the contact patch. There is a limited amount of force the contact patch can transmit before the tire begins to slide.

If the driver makes a curve on a motorcycle, the driver applies a force on the motorcycle, causing it to alter its course. This force is transferred to the motorcycle through the contact patch. Braking within a curve will increase the stress in the contact patch, because now there is an additional force which also has to be transmitted through the contact patch. This additional amount of force may cause the tire to slide and lock. If braking is applied equally to both tires, the rear tire will begin to slide first because braking causes a weight shift towards the front tire, improving its contact with the road while lessening the rear tire's grip.

Once a tire slips in a curve, it will move outwards under the motorcycle and cause the cycle to lay down in the direction the driver is already leaning to counteract the centrifugal force. Unless this movement is counteracted, the motorcycle will lay down and slide outwards. Counteracting this movement by reducing brake force may lead to a highsider.

The name derives from the fact that it is usually the inward side the motorcycle will fall on (or the side that points downward in a curve, the low side).

Drivers are usually advised to do a lowsider rather than a highsider if neither can be avoided. The lowsider has the advantage of the motorcycle sliding before the driver, thus not threatening to crush him.